Callowgraphics - 07969340547

High Quality Custom Graphics,Signs & Decals Made From Electronic Cut Vinyl For
Business, Home & Vehicles.

Callowgraphics Can Offer A Very Wide Range Of Products To Suit Every Need. There Is A Massive Range That Can Be Catered For, Vehicle Decals, Wall Graphics For Interior Design, Heath And Safety Signs, Vehicle Signage To Name But A Few.
There Are Many Designs In Stock 750,000+. If You Would Like Custom Made Graphics Please Get In Touch. Nothing Is Ever Made Until There Is 100% Approval By You.

If You Do Order With Callowgraphics Feel Free To Add A Photo Of Your New Artwork On This Page.

Application Instructions
Tools Required;
Plastic Squeegee/Card (Sold Separately)
Maybe a Pin or a Needle
Plastic Squeegee/Card Can Be Supplied With your Order For An Extra £1

Instructions;
1. Place design face up on a flat surface and with the plastic squeegee/card rub over the graphic ensuring the entire graphic has adhered to the application tape.
2. Turn over the graphic face down and begin to peel away the wax backing paper slowly ensuring the graphic is stuck to the application tape. Carefully replace wax paper and refer to step 1 if the graphic is still stuck to the wax paper.
3. With the wax paper now removed ensure the application surface is clean and dry before continuing. A generic glass cleaning spray will do the job great, wipe clean and dry with a lint free cloth.
4. Carefully line up your graphic on to your chosen location ensuring no pressure is applied to the graphic itself until you are happy. For large graphics it is recommended that the chosen location is marked out before application.
5. With the plastic squeegee/card apply pressure to the graphic starting from the middle and work outwards smoothing out any creases or air bubbles as you go.
6. Starting at one corner gently pull away the application tape at 180 degrees to the graphic ensuring the graphic has stuck, if not replace application tape and rub over until it adheres.
7. Finally check your graphic for any air bubbles present, if there are use a pin or a needle and gently prick the bubble and apply light pressure to remove it.
****STAND BACK AND ADMIRE YOUR HANDY WORK****